Aunex AM800.1D Class D Monoblock Amplifier 800W x 1 @ 2 Ohm

Aunex Mini Amplifiers (AM Series) are Full Range Digital / Class D Mono amplifiers. AM Series amplifiers are designed for the challenge of providing ample power to drive your system while keeping the overall footprint of the amplifier small. This was achieved by utilizing a 4-layer military-spec circuit board incorporating the newest chipset from International Rectifier®. If installation space is limited, don’t settle for any mini amplifier, select the Aunex AM series AM800.1D today.

Features

• Output Optimized for both 2 Ohm or 1 Ohm Load
• Fully Variable Infrasonic Filter
• Remote Level Control Included
• Fully Variable Crossover 24dB/Octave Slope
• Auto-Sensing in High-Level Input Mode
• Output Clipping Indicators
• Heavy Density Aluminum Extruded Heatsink
• Die Cast End Caps
• Finish: Anodized with Brush Finish

Specifications

• Channels: 1
• Rated RMS Power: 14.4V @ 100Hz
• 1 Ohm Mono: 800 Watts x 1
• 2 Ohm Mono: 800 Watts x 1
• 4 Ohm Mono: 400 Watts x 1
• Frequency Response 10Hz — 250Hz
• THD + Noise: < 1.0%
• S/N Ratio A-Weighted: > 107dB
• Input Sensitivity: 250mV — 10V
• Crossover: 50Hz — 250Hz
• Infrasonic Filter: 10Hz — 50Hz
• Boost EQ: 0 — 18dB @ 45Hz Center
• Efficiency @ 4 Ohm: 85%
• Operating Voltage: 9 — 17 Volts
• Dimensions (H x W x D): 1.6" x 10.7" x 4.3"
• Fuse Requirement: 80A (Included)

Aunex AM800.1D Class D Monoblock Amplifier 800W x 1 @ 2 Ohm

Aunex Mini Amplifiers (AM Series) are Full Range Digital / Class D Mono amplifiers. AM Series amplifiers are designed for the challenge of providing ample power to drive your system while keeping the overall footprint of the amplifier small. This was achieved by utilizing a 4-layer military-spec circuit board incorporating the newest chipset from International Rectifier®. If installation space is limited, don’t settle for any mini amplifier, select the Aunex AM series AM800.1D today.

Features

• Output Optimized for both 2 Ohm or 1 Ohm Load
• Fully Variable Infrasonic Filter
• Remote Level Control Included
• Fully Variable Crossover 24dB/Octave Slope
• Auto-Sensing in High-Level Input Mode
• Output Clipping Indicators
• Heavy Density Aluminum Extruded Heatsink
• Die Cast End Caps
• Finish: Anodized with Brush Finish

Specifications

• Channels: 1
• Rated RMS Power: 14.4V @ 100Hz
• 1 Ohm Mono: 800 Watts x 1
• 2 Ohm Mono: 800 Watts x 1
• 4 Ohm Mono: 400 Watts x 1
• Frequency Response 10Hz — 250Hz
• THD + Noise: < 1.0%
• S/N Ratio A-Weighted: > 107dB
• Input Sensitivity: 250mV — 10V
• Crossover: 50Hz — 250Hz
• Infrasonic Filter: 10Hz — 50Hz
• Boost EQ: 0 — 18dB @ 45Hz Center
• Efficiency @ 4 Ohm: 85%
• Operating Voltage: 9 — 17 Volts
• Dimensions (H x W x D): 1.6" x 10.7" x 4.3"
• Fuse Requirement: 80A (Included)